I need some help. I can’t seem to get sailwave to score a race using PHRF handicaps. When I score the race, the software scores participants in order of their finish or elapsed time only . It doesn’t appear to factor in the handicap ratings. HELP!
Hi John,
I suspect that you have not configured each race to use finish or
elapsed time. It is not enough to just select the rating system to
be used.
To change the default place finish, you need to right click on each
race column header followed by highlighting a start and the clicking
the edit button. You then select finish or elapsed from the drop
down list box alongside the words "Finishes will be recorded as ".
You then need to click OK.
Couple of tips:
-
You can copy the setting once set up for one race to a
selection of other races.
-
When you have results for a race I suggest you use the edit
race button in the Sail number Wizard and select the race in
question and enter the start time in the race information. This
will save you having to enter it for each competitor as you
enter information using the Sail Number Wizard.
Kind regards,
Huw
···
On 15/05/2015 17:49, ‘John Scarborough’
[sailwave] wrote:
I need some help. I can't seem to getsailwave to score a race using PHRF handicaps. When I
score the race, the software scores participants in
order of their finish or elapsed time only . It doesn’t
appear to factor in the handicap ratings. HELP!
This email has been checked for
viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
Did you set PHRF under Scoring System / Rating system?
Sailwave offers the choice of PHRF ToT or ToD - not sure which one would suit your application.
regards,
Malcolm Osborne
Sedgefield South Africa
···
On 2015/05/15 18:49, 'John Scarborough' saylracer@att.net [sailwave] wrote:
I need some help. I can't seem to get sailwave to score a race using PHRF handicaps. When I score the race, the software scores participants in order of their finish or elapsed time only . It doesn't appear to factor in the handicap ratings. HELP!
------------------------------------------------------------------------
Avast logo <http://www.avast.com/>This email has been checked for viruses by Avast antivirus software.
www.avast.com <http://www.avast.com/>
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Yes, I think I fixed that problem. I needed to set the AB coefficients in the Time on Time page. I now have a different problem. We start a small PHRF fleet and one design fleet together. When scoring sailwave determines a corrected time for the one design fleet even though no handicap is specified. I would like to publish corrected times for the phrf fleet and places only for the one design. How do I set this up?
···
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Friday, May 15, 2015 3:51 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PHRF
Did you set PHRF under Scoring System / Rating system?
Sailwave offers the choice of PHRF ToT or ToD - not sure which one would suit your application.
regards,
Malcolm Osborne
Sedgefield South Africa
On 2015/05/15 18:49, 'John Scarborough' saylracer@att.net [sailwave] wrote:
> I need some help. I can't seem to get sailwave to score a race using PHRF handicaps. When I score the race, the software scores participants in order of their finish or elapsed time only . It doesn't appear to factor in the handicap ratings. HELP!
>
>
> ---
>
> [<img border="0" width="100" height="100" id="_x0000_i1026" src="cid:~WRD000.jpg" alt="Image removed by sender. Avast logo">](http://www.avast.com/)
> This email has been checked for viruses by Avast antivirus software.
> [www.avast.com](http://www.avast.com/)
>
>
---
[<img border="0" width="100" height="100" id="_x0000_i1028" src="cid:~WRD000.jpg" alt="Image removed by sender. Avast logo">](http://www.avast.com/)
This email has been checked for viruses by Avast antivirus software.
[www.avast.com](http://www.avast.com/)
</details>Hi Jim,
You will need to do a few things I think from the information you
have given.
-
For each race create 2 starts, one for PHRF & one for one
design fleet, even though they are starting at the same time.
-
For the PHRF start you will need to set finish or elapsed time
-
For one design you will have to set place finishes
I am presuming you have have tagged PHRF boats in the Fleet column
with PHRF and the One Design bopats in the fleet column with say One
Design. If you have you then use the second option when the scoring
window opens and everything should be fine.If you still have problems send me the file and will take a look at
it for you.PS - have you downloaded and read Mark Townsend’s Sailwave User
Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf .
If not I think you would find it helpful.Kind regards,
Huw
···
On 17/05/2015 19:56, ‘John Scarborough’
[sailwave] wrote:
Yes, I think Ifixed that problem. I needed to set the AB
coefficients in the Time on Time page. I now have a
different problem. We start a small PHRF fleet and one
design fleet together. When scoring sailwave
determines a corrected time for the one design fleet
even though no handicap is specified. I would like to
publish corrected times for the phrf fleet and places
only for the one design. How do I set this up?
�
From:
[] Friday, May 15, 2015 3:51 PMRe: [sailwave] PH RF
�
�
Did you set PHRF underScoring System / Rating system?
Sailwave offers the choice of PHRF ToT or ToD -not sure which one would suit your application.
regards,Malcolm OsborneSedgefield South AfricaOn 2015/05/15 18:49, 'JohnScarborough’ saylracer@att.net
[sailwave] wrote:
�
I need some help. I can'tseem to get sailwave to score a race using
PHRF handicaps. When I score the race, the
software scores participants in order of
their finish or elapsed time only . It
doesn’t appear to factor in the handicap
ratings. HELP!
�
This emailhas been checked for viruses by Avast
antivirus software.[www.avast.com](http://www.avast.com/)
This emailhas been checked for viruses by Avast
antivirus software.[www.avast.com](http://www.avast.com/)
�
This email has been checked for
viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
sailwave@yahoogroups.commailto:sailwave@yahoogroups.com
Sent:
**To:**sailwave@yahoogroups.com
Subject:
I think I followed the directions properly, but it still doesn’t work. Can you look at the file and tell if you see something wrong?
···
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Sunday, May 17, 2015 12:15 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PHRF
Hi Jim,
You will need to do a few things I think from the information you have given.
-
For each race create 2 starts, one for PHRF & one for one design fleet, even though they are starting at the same time.
-
For the PHRF start you will need to set finish or elapsed time
-
For one design you will have to set place finishes
I am presuming you have have tagged PHRF boats in the Fleet column with PHRF and the One Design bopats in the fleet column with say One Design. If you have you then use the second option when the scoring window opens and everything should be fine.
If you still have problems send me the file and will take a look at it for you.
PS - have you downloaded and read Mark Townsend’s Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf. If not I think you would find it helpful.
Kind regards,
Huw
On 17/05/2015 19:56, ‘John Scarborough’ saylracer@att.net [sailwave] wrote:
Yes, I think I fixed that problem. I needed to set the AB coefficients in the Time on Time page. I now have a different problem. We start a small PHRF fleet and one design fleet together. When scoring sailwave determines a corrected time for the one design fleet even though no handicap is specified. I would like to publish corrected times for the phrf fleet and places only for the one design. How do I set this up?
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Friday, May 15, 2015 3:51 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PH RF
Did you set PHRF under Scoring System / Rating system?
Sailwave offers the choice of PHRF ToT or ToD - not sure which one would suit your application.
regards,
Malcolm Osborne
Sedgefield South Africa
On 2015/05/15 18:49, ‘John Scarborough’ saylracer@att.net [sailwave] wrote:
I need some help. I can’t seem to get sailwave to score a race using PHRF handicaps. When I score the race, the software scores participants in order of their finish or elapsed time only . It doesn’t appear to factor in the handicap ratings. HELP!
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Hi
I think this is what you want - see revised blw file attached
What was missing was the definition of the scoring system for the San Juan 21 Fleet
In the scoring system on the Fleets tab - I’ve created an entry for the Fleet San Juan 21 then edited this and unticked the inherit Rating system and set the ratings system to None
Let me know if this is what you wanted
Jon
···
On 17 May 2015 at 22:42, ‘John Scarborough’ saylracer@att.net [sailwave] sailwave@yahoogroups.com wrote:
I think I followed the directions properly, but it still doesn’t work. Can you look at the file and tell if you see something wrong?
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Sunday, May 17, 2015 12:15 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PHRF
Hi Jim,
You will need to do a few things I think from the information you have given.
- For each race create 2 starts, one for PHRF & one for one design fleet, even though they are starting at the same time.
- For the PHRF start you will need to set finish or elapsed time
- For one design you will have to set place finishes
I am presuming you have have tagged PHRF boats in the Fleet column with PHRF and the One Design bopats in the fleet column with say One Design. If you have you then use the second option when the scoring window opens and everything should be fine.If you still have problems send me the file and will take a look at it for you.
PS - have you downloaded and read Mark Townsend’s Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf. If not I think you would find it helpful.
Kind regards,
Huw
On 17/05/2015 19:56, ‘John Scarborough’ saylracer@att.net [sailwave] wrote:
Yes, I think I fixed that problem. I needed to set the AB coefficients in the Time on Time page. I now have a different problem. We start a small PHRF fleet and one design fleet together. When scoring sailwave determines a corrected time for the one design fleet even though no handicap is specified. I would like to publish corrected times for the phrf fleet and places only for the one design. How do I set this up?
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Friday, May 15, 2015 3:51 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PH RF
Did you set PHRF under Scoring System / Rating system?
Sailwave offers the choice of PHRF ToT or ToD - not sure which one would suit your application.
regards,Malcolm OsborneSedgefield South AfricaOn 2015/05/15 18:49, ‘John Scarborough’ saylracer@att.net [sailwave] wrote:
I need some help. I can’t seem to get sailwave to score a race using PHRF handicaps. When I score the race, the software scores participants in order of their finish or elapsed time only . It doesn’t appear to factor in the handicap ratings. HELP!
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Jon Eskdale
07976 709777
Skype “eskdale”
That seems to work…thanks!
···
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Sunday, May 17, 2015 4:04 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PHRF [1 Attachment]
Hi
I think this is what you want - see revised blw file attached
What was missing was the definition of the scoring system for the San Juan 21 Fleet
In the scoring system on the Fleets tab - I’ve created an entry for the Fleet San Juan 21 then edited this and unticked the inherit Rating system and set the ratings system to None
Let me know if this is what you wanted
Jon
Jon Eskdale
07976 709777
Skype “eskdale”
On 17 May 2015 at 22:42, ‘John Scarborough’ saylracer@att.net [sailwave] sailwave@yahoogroups.com wrote:
I think I followed the directions properly, but it still doesn’t work. Can you look at the file and tell if you see something wrong?
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Sunday, May 17, 2015 12:15 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PHRF
Hi Jim,
You will need to do a few things I think from the information you have given.
-
For each race create 2 starts, one for PHRF & one for one design fleet, even though they are starting at the same time.
-
For the PHRF start you will need to set finish or elapsed time
-
For one design you will have to set place finishes
I am presuming you have have tagged PHRF boats in the Fleet column with PHRF and the One Design bopats in the fleet column with say One Design. If you have you then use the second option when the scoring window opens and everything should be fine.
If you still have problems send me the file and will take a look at it for you.
PS - have you downloaded and read Mark Townsend’s Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf. If not I think you would find it helpful.
Kind regards,
Huw
On 17/05/2015 19:56, ‘John Scarborough’ saylracer@att.net [sailwave] wrote:
Yes, I think I fixed that problem. I needed to set the AB coefficients in the Time on Time page. I now have a different problem. We start a small PHRF fleet and one design fleet together. When scoring sailwave determines a corrected time for the one design fleet even though no handicap is specified. I would like to publish corrected times for the phrf fleet and places only for the one design. How do I set this up?
From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com]
Sent: Friday, May 15, 2015 3:51 PM
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] PH RF
Did you set PHRF under Scoring System / Rating system?
Sailwave offers the choice of PHRF ToT or ToD - not sure which one would suit your application.
regards,
Malcolm Osborne
Sedgefield South Africa
On 2015/05/15 18:49, ‘John Scarborough’ saylracer@att.net [sailwave] wrote:
I need some help. I can’t seem to get sailwave to score a race using PHRF handicaps. When I score the race, the software scores participants in order of their finish or elapsed time only . It doesn’t appear to factor in the handicap ratings. HELP!
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com