Rating files

Jim1 · 5 May 2011 21:57

HI
I seem to have managed to download a rating file correctly. I can now change the PY numbers in my files but I still have to go into each racer individually click on the blue wavy lines and then select the appropriate class. This is quicker than doing it manually but not much.
Is it possible to update all boats in a given file automatically or by one action?
Please if yes explain in simple terms not technospeak!!
Thanks
Jim
Aldenham SC

IanF · 6 May 2011 07:06

I think I'm right to say that you should select 'Auto set competitor ratings' in 'Setup/Scoring system/Rating system.'

Ian Frogley

···

On 05/05/2011 22:57, Jim wrote:

HI
I seem to have managed to download a rating file correctly. I can now change the PY numbers in my files but I still have to go into each racer individually click on the blue wavy lines and then select the appropriate class. This is quicker than doing it manually but not much.
Is it possible to update all boats in a given file automatically or by one action?
Please if yes explain in simple terms not technospeak!!
Thanks
Jim
Aldenham SC

------------------------------------

-!- http://www.yachtsandyachting.com/ -!- http://www.sailing.org/ -!- http://www.sailwave.com/ -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

Jim1 · 9 May 2011 21:49

Thanks Ian, I have done that but no change. I seem to have done something in that now every time I open Sailwave I get a message saying <Cannot connect to ftp.sailwave.com> would that make a difference? The ratings file is on my computer so I didn't think so but I didn't used to get that message.
Jim

···

--- In sailwave@yahoogroups.com, Ian Frogley <ian.frogley@...> wrote:

I think I'm right to say that you should select 'Auto set competitor
ratings' in 'Setup/Scoring system/Rating system.'

Ian Frogley

On 05/05/2011 22:57, Jim wrote:
> HI
> I seem to have managed to download a rating file correctly. I can now change the PY numbers in my files but I still have to go into each racer individually click on the blue wavy lines and then select the appropriate class. This is quicker than doing it manually but not much.
> Is it possible to update all boats in a given file automatically or by one action?
> Please if yes explain in simple terms not technospeak!!
> Thanks
> Jim
> Aldenham SC
>
>
>
> ------------------------------------
>
> -!- http://www.yachtsandyachting.com/ -!- http://www.sailing.org/ -!- http://www.sailwave.com/ -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links
>
>
>
>

Matt_W · 9 May 2011 21:59

I am seeing the same behavior. I emailed Colin to ask if it was a bug,
but I am sure he is a very busy guy. it took me forevever to
figure out the squigly blue line thing I was selecting classes with
the dropdown list and it didn't populate the ratings at all.

Matt

···

On 5/9/11, Jim <jimstrother@rocketmail.com> wrote:

Thanks Ian, I have done that but no change. I seem to have done something in
that now every time I open Sailwave I get a message saying <Cannot connect
to ftp.sailwave.com> would that make a difference? The ratings file is on
my computer so I didn't think so but I didn't used to get that message.
Jim

--- In sailwave@yahoogroups.com, Ian Frogley <ian.frogley@...> wrote:

I think I'm right to say that you should select 'Auto set competitor
ratings' in 'Setup/Scoring system/Rating system.'

Ian Frogley

On 05/05/2011 22:57, Jim wrote:
> HI
> I seem to have managed to download a rating file correctly. I can now
> change the PY numbers in my files but I still have to go into each racer
> individually click on the blue wavy lines and then select the
> appropriate class. This is quicker than doing it manually but not much.
> Is it possible to update all boats in a given file automatically or by
> one action?
> Please if yes explain in simple terms not technospeak!!
> Thanks
> Jim
> Aldenham SC
>
>
>
> ------------------------------------
>
> -!- http://www.yachtsandyachting.com/ -!- http://www.sailing.org/ -!-
> http://www.sailwave.com/ -!- On-Line Sailwave
> help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User
> Guide is available from
> http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf ~ Convert to
> daily digest of emails send blank email to
> sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please
> send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups
> Links
>
>
>
>

--
Sent from my mobile device

--
Matt Woodall
A Comfortable Sail Facebook page
http://www.facebook.com/pages/A-Comfortable-Sail/117513008281225

"Most people are about as happy as they decide to be." -- Abraham Lincoln

Calum_Polwart · 9 May 2011 22:11

There were some server changes today which might have caused that but I just uploaded to sailwave site no probs. Which release are you using (im still on 2.06b but 2.07 was released yesterday and could have a bug?

Can you post a file for us to look at?

···

On Mon, 09 May 2011 21:49:33 -0000, “Jim” jimstrother@rocketmail.com wrote:

Thanks Ian, I have done that but no change. I seem to have done something in that now every time I open Sailwave I get a message saying would that make a difference? The ratings file is on my computer so I didn’t think so but I didn’t used to get that message.
Jim

ColinJenkins · 9 May 2011 22:18

That message is probably because you’ve turned
on the automatic “check for upgrades” and for some reason it
cannot connect. Check if you have indeed turned it on in the
Setup+GlobalOptions menu Upgrades tab.

  Use Help+LogBook to see if Sailwave is loading ratings and where

from. Use the “Copy to clipboard” to grab the content of the
logbook and send it in a message so we can see what’s happening.
There is no private information in it.

  The blue wavey line is explained in the help file.

  If the ratings are set up correctly the rating should get set when

a class is selected from the list. Though it has gone through
some quirky times.
Alternatively you can turn on the auto update ratings thing in the
scoring system and Sailwave updates ratings when it scores.
It’s useful to attach a sailwave file (.blw) and the content of
the log book to help us find solutions.

···

http://sailwave.com/help/HTML/theuserinterface.htm

Regards,
Colin J

www.sailwave.com




Thanks Ian, I have done that but no change. I seem to have done something in that now every time I open Sailwave I get a message saying <Cannot connect to > would that make a difference? The ratings file is on my computer so I didn't think so but I didn't used to get that message.
Jim
--- In , Ian Frogley wrote:


I think I'm right to say that you should select 'Auto set competitor ratings' in 'Setup/Scoring system/Rating system.'
Ian Frogley
On 05/05/2011 22:57, Jim wrote:




HI
I seem to have managed to download a rating file correctly. I can now change the PY numbers in my files but I still have to go into each racer individually click on the blue wavy lines and then select the appropriate class. This is quicker than doing it manually but not much.
Is it possible to update all boats in a given file automatically or by one action?
Please if yes explain in simple terms not technospeak!!
Thanks
Jim
Aldenham SC
------------------------------------
-!- -!- -!- -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from ~ Convert to daily digest of emails send blank email to ~ To unsubscribe from the SUG please send blank email to Yahoo! Groups Links


------------------------------------
-!- -!- -!- -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from ~ Convert to daily digest of emails send blank email to ~ To unsubscribe from the SUG please send blank email to Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
-----
No virus found in this message.
Checked by AVG - Version: 10.0.1325 / Virus Database: 1500/3626 - Release Date: 05/09/11

ftp.sailwave.comsailwave@yahoogroups.com<ian.frogley@…>http://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://groups.yahoo.com/group/sailwave/http://groups.yahoo.com/group/sailwave/joinsailwave-digest@yahoogroups.comsailwave-fullfeatured@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://docs.yahoo.com/info/terms/www.avg.com

IanF · 10 May 2011 07:15

This is the window where you select your ratings. Main menu ‘Setup’
then ‘Scoring System’

Ian

···

ftp.sailwave.comsailwave@yahoogroups.com<ian.frogley@…>http://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://groups.yahoo.com/group/sailwave/http://groups.yahoo.com/group/sailwave/joinsailwave-digest@yahoogroups.comsailwave-fullfeatured@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://docs.yahoo.com/info/terms/

J_S_Strother · 13 May 2011 22:25

I have checked that in Upgrades the connect to internet option is selected. The ryapn file is in C:/Program files/Sailwave/Ratings (it is an excel file as that was the only way to download it from the Sailwave site but it is Excel .csv as far as I can tell. I still get the cannot connect to ftp.sailwave.com message every time I open any file.
The log file is here:
I would attach the file I am working on - but tonight there is no option to attach a file - last night on this forum there was. Wish I understood these things better.
Thanks
Jim

23:18:12 CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Spring 11\wed_1
_2011.blw
23:18:12 CmdLineOpenProforma=0
23:18:12 CmdLineOpenNew=0
23:18:12 CmdLineShear=0
23:18:12 ScreenWidth=1366
23:18:12 ScreenHeight=768
23:18:12 WindowsVersion=5.1.2600
23:18:12 WindowsUser=Strothers
23:18:12 SailwaveVersion=2.00 build 6
23:18:12 InstalledOn=05/02/11 21:12:11
23:18:12 InstalledBy=Strothers
23:18:12 ProgramFolder=C:\Program Files\Sailwave
23:18:12 StartInFolder=C:\Users\Strothers\Desktop\Documents
23:18:13 TempFileFolder=C:\Users\Strothers\AppData\Local\Temp
23:18:13 MyDocsFolder=C:\Users\Strothers\Desktop\Documents
23:18:13 CommandLine=open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Spring 11
\wed_1_2011.blw"
23:18:13 Loaded 9 publishing templates
23:18:13 Loading ratings from C:\Program Files\Sailwave\Ratings\
23:18:13 Loaded 316 ratings
23:18:13 Message - Cannot connect to ftp.sailwave.com

···

--- In sailwave@yahoogroups.com, Ian Frogley <ian.frogley@...> wrote:

This is the window where you select your ratings. Main menu 'Setup' then
'Scoring System'

Ian

On 09/05/2011 22:49, Jim wrote:
> Thanks Ian, I have done that but no change. I seem to have done something in that now every time I open Sailwave I get a message saying<Cannot connect to ftp.sailwave.com> would that make a difference? The ratings file is on my computer so I didn't think so but I didn't used to get that message.
> Jim
>
>
>
> --- In sailwave@yahoogroups.com, Ian Frogley<ian.frogley@> wrote:
>> I think I'm right to say that you should select 'Auto set competitor
>> ratings' in 'Setup/Scoring system/Rating system.'
>>
>> Ian Frogley
>>
>>
>> On 05/05/2011 22:57, Jim wrote:
>>> HI
>>> I seem to have managed to download a rating file correctly. I can now change the PY numbers in my files but I still have to go into each racer individually click on the blue wavy lines and then select the appropriate class. This is quicker than doing it manually but not much.
>>> Is it possible to update all boats in a given file automatically or by one action?
>>> Please if yes explain in simple terms not technospeak!!
>>> Thanks
>>> Jim
>>> Aldenham SC
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> -!- http://www.yachtsandyachting.com/ -!- http://www.sailing.org/ -!- http://www.sailwave.com/ -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links
>>>
>>>
>>>
>>>
>
>
>
> ------------------------------------
>
> -!- http://www.yachtsandyachting.com/ -!- http://www.sailing.org/ -!- http://www.sailwave.com/ -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links
>
>
>
>

ColinJenkins · 15 May 2011 12:06

can you try latest dev version of website pls.
ta

···

Regards,
Colin J

www.sailwave.com



I have checked that in Upgrades the connect to internet option is selected. The ryapn file is in C:/Program files/Sailwave/Ratings (it is an excel file as that was the only way to download it from the Sailwave site but it is Excel .csv as far as I can tell. I still get the cannot connect to message every time I open any file. The log file is here:
I would attach the file I am working on - but tonight there is no option to attach a file - last night on this forum there was. Wish I understood these things better.
Thanks
Jim
23:18:12 CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Spring 11\wed_1
_2011.blw
23:18:12 CmdLineOpenProforma=0
23:18:12 CmdLineOpenNew=0
23:18:12 CmdLineShear=0
23:18:12 ScreenWidth=1366
23:18:12 ScreenHeight=768
23:18:12 WindowsVersion=5.1.2600
23:18:12 WindowsUser=Strothers
23:18:12 SailwaveVersion=2.00 build 6
23:18:12 InstalledOn=05/02/11 21:12:11
23:18:12 InstalledBy=Strothers
23:18:12 ProgramFolder=C:\Program Files\Sailwave
23:18:12 StartInFolder=C:\Users\Strothers\Desktop\Documents
23:18:13 TempFileFolder=C:\Users\Strothers\AppData\Local\Temp
23:18:13 MyDocsFolder=C:\Users\Strothers\Desktop\Documents
23:18:13 CommandLine=open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Spring 11
\wed_1_2011.blw"
23:18:13 Loaded 9 publishing templates
23:18:13 Loading ratings from C:\Program Files\Sailwave\Ratings\
23:18:13 Loaded 316 ratings
23:18:13 Message - Cannot connect to --- In , Ian Frogley wrote:



This is the window where you select your ratings. Main menu 'Setup' then 'Scoring System'
Ian
On 09/05/2011 22:49, Jim wrote:




Thanks Ian, I have done that but no change. I seem to have done something in that now every time I open Sailwave I get a message saying<Cannot connect to > would that make a difference? The ratings file is on my computer so I didn't think so but I didn't used to get that message.
Jim
--- In , Ian Frogley<ian.frogley@> wrote:


I think I'm right to say that you should select 'Auto set competitor
ratings' in 'Setup/Scoring system/Rating system.'
Ian Frogley
On 05/05/2011 22:57, Jim wrote:




HI
I seem to have managed to download a rating file correctly. I can now change the PY numbers in my files but I still have to go into each racer individually click on the blue wavy lines and then select the appropriate class. This is quicker than doing it manually but not much.
Is it possible to update all boats in a given file automatically or by one action?
Please if yes explain in simple terms not technospeak!!
Thanks
Jim
Aldenham SC
------------------------------------
-!- -!- -!- -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from ~ Convert to daily digest of emails send blank email to ~ To unsubscribe from the SUG please send blank email to Yahoo! Groups Links


------------------------------------
-!- -!- -!- -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from ~ Convert to daily digest of emails send blank email to ~ To unsubscribe from the SUG please send blank email to Yahoo! Groups Links


------------------------------------
-!- -!- -!- -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from ~ Convert to daily digest of emails send blank email to ~ To unsubscribe from the SUG please send blank email to Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
-----
No virus found in this message.
Checked by AVG - Version: 10.0.1325 / Virus Database: 1500/3639 - Release Date: 05/15/11

ftp.sailwave.comftp.sailwave.comsailwave@yahoogroups.com<ian.frogley@…>ftp.sailwave.comsailwave@yahoogroups.com http://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://groups.yahoo.com/group/sailwave/http://groups.yahoo.com/group/sailwave/joinsailwave-digest@yahoogroups.comsailwave-fullfeatured@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://docs.yahoo.com/info/terms/www.avg.com

J_S_Strother · 17 May 2011 21:38

Colin
Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would have to do each one manually by clicking on the blue wave icon. No different from when I started.
Log file below.
Thanks
Jim

22:31:05 CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent
          _spring1_2008.blw
22:31:05 CmdLineOpenProforma=0
22:31:05 CmdLineOpenNew=0
22:31:05 CmdLineShear=0
22:31:05 CmdRunFromRoot=0
22:31:05 SailwaveVersion=2.03 build 2
22:31:05 ScreenWidth=1366
22:31:05 ScreenHeight=768
22:31:05 WindowsVersion=6.0.6002
22:31:05 WindowsUser=Strothers
22:31:05 InstalledOn=05/17/11 19:03:49
22:31:05 InstalledBy=Strothers
22:31:05 ProgramFolder=C:\Program Files\Sailwave
22:31:05 StartInFolder=C:\Users\Strothers\Desktop\Documents
22:31:05 TempFileFolder=C:\Users\Strothers\AppData\Local\Temp
22:31:05 MyDocsFolder=C:\Users\Strothers\Desktop\Documents
22:31:05 DataFolder=C:\ProgramData\Sailwave
22:31:05 CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol
          der\ent_spring1_2008.blw"
22:31:05 Loaded 9 publishing templates
22:31:06 Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa
          ve ratings\
22:31:06 Loaded 81 ratings
22:31:07 Loaded 9 publishing templates

ColinJenkins · 18 May 2011 10:37

jim, can you attach your sailwave file.
i agree you should have to connect each rating by hand - the auto
facility will do it for you (or should) as long as the class names
match up of course…

···

Regards,
Colin J

www.sailwave.com

 Colin
Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would have to do each one manually by clicking on the blue wave icon. No different from when I started.
Log file below.
Thanks
Jim
22:31:05 CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent
_spring1_2008.blw
22:31:05 CmdLineOpenProforma=0
22:31:05 CmdLineOpenNew=0
22:31:05 CmdLineShear=0
22:31:05 CmdRunFromRoot=0
22:31:05 SailwaveVersion=2.03 build 2
22:31:05 ScreenWidth=1366
22:31:05 ScreenHeight=768
22:31:05 WindowsVersion=6.0.6002
22:31:05 WindowsUser=Strothers
22:31:05 InstalledOn=05/17/11 19:03:49
22:31:05 InstalledBy=Strothers
22:31:05 ProgramFolder=C:\Program Files\Sailwave
22:31:05 StartInFolder=C:\Users\Strothers\Desktop\Documents
22:31:05 TempFileFolder=C:\Users\Strothers\AppData\Local\Temp
22:31:05 MyDocsFolder=C:\Users\Strothers\Desktop\Documents
22:31:05 DataFolder=C:\ProgramData\Sailwave
22:31:05 CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol
der\ent_spring1_2008.blw"
22:31:05 Loaded 9 publishing templates
22:31:06 Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa
ve ratings\
22:31:06 Loaded 81 ratings
22:31:07 Loaded 9 publishing templates
------------------------------------
-!- -!- -!- -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from ~ Convert to daily digest of emails send blank email to ~ To unsubscribe from the SUG please send blank email to Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
-----
No virus found in this message.
Checked by AVG - Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11

http://www.yachtsandyachting.com/http://www.sailing.org/http://www.sailwave.com/http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdfsailwave-digest@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://groups.yahoo.com/group/sailwave/http://groups.yahoo.com/group/sailwave/joinsailwave-digest@yahoogroups.comsailwave-fullfeatured@yahoogroups.comsailwave-unsubscribe@yahoogroups.comhttp://docs.yahoo.com/info/terms/www.avg.com

Ian_Day · 18 May 2011 12:54

Colin,

I have been experiencing the same problem for a while – Until I saw someone else discussing how to find a solution, I had thought it was just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

13:40:10 CmdLineOpenProforma=0

13:40:10 CmdLineOpenNew=0

13:40:10 CmdLineShear=0

13:40:10 CmdRunFromRoot=0

13:40:10 ScreenWidth=1280

13:40:10 ScreenHeight=1024

13:40:10 WindowsVersion=5.1.2600

13:40:10 WindowsUser=Ian Day

13:40:10 SailwaveVersion=2.02 build 5

13:40:10 InstalledOn=08/10/10 16:25:15

13:40:10 InstalledBy=Ian Day

13:40:10 ProgramFolder=C:\Files from Viao\Sailwave

13:40:10 StartInFolder=C:\Users\Ian Day\Documents

13:40:10 TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

13:40:10 MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

13:40:10 Loaded 9 publishing templates

13:40:10 Loading ratings from C:\A Working Folder\Personal\HCSC\Saturday Series 2011\Sail

wave Files\

13:40:10 Loaded 103 ratings

13:40:20 Loaded 9 publishing templates

I attach both the .blw file and the Ratings file. One thing which puzzles me about the log file is that it says it has loaded 103 ratings, but there are rather more than that in the file!

When I set up a new competitor, I use the drop-down list of classes in the Competitor window, but to get the Handicap field populated, I have to click on the wavy blue line. The window to the Handicap file opens with the right class selected, and when I click on OK, the handicap field in the competitor window is populated – so I think my problem is the same as Jim’s.

I would be interested if you can suggest a way of getting back to having the handicap field filled in automatically – I’m sure I had that when I first started using Sailwave!

Regards,

Ian Day

···

From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com] On Behalf Of Colin Jenkins
Sent: 18 May 2011 11:37
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] Re: Rating files

jim, can you attach your sailwave file. i agree you should have to connect each rating by hand - the auto facility will do it for you (or should) as long as the class names match up of course…

Regards,

Colin J

[www.sailwave.com](http://www.sailwave.com)

On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05 CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05 CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05 CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05 SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05 ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05 WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05 InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05 StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05 MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05 CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05 Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07 Loaded 9 publishing templates

-!- http://www.yachtsandyachting.com/ -!- http://www.sailing.org/ -!- http://www.sailwave.com/ -!- On-Line Sailwave help…http://sailwave.com/help/HTML ~ Mark Townsend’s Sailwave User Guide is available from http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Individual Email | Traditional

<*> To change settings online go to:

[http://groups.yahoo.com/group/sailwave/join](http://groups.yahoo.com/group/sailwave/join)

(Yahoo! ID required)

<*> To change settings via email:

sailwave-digest@yahoogroups.com

sailwave-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:

sailwave-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/

No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11


</details>

ColinJenkins · 18 May 2011 13:57

eek!

  Sorry Ian and Jim et al.  It was a bug.  Fixed now in 2.03 build 3

on website.

  When you type in a class and click/tab away or select a class from

the drop-down, the rating field auto updates ok now. it uses
existing competitors first (in case you’ve tweaked the value in
the rating files) and if not found uses the rating files.

  you can also use the selector (wavey lines) to select classes that

don’t exist in the series yet and it uses the value from the item
you selected.

  can't explain the "105" yet - i'll look later.

  batter me round the head a bit more next time...  must have been

there a long time.

···

Regards,
Colin J

www.sailwave.com

Colin,

        I have been experiencing the same problem for a
while – Until I saw someone else discussing how to find a
solution, I had thought it was just an inconvenience to live
with!

Here is the log file:-

13:40:10 CmdLineFile=

13:40:10 CmdLineOpenProforma=0

13:40:10 CmdLineOpenNew=0

13:40:10 CmdLineShear=0

13:40:10 CmdRunFromRoot=0

13:40:10 ScreenWidth=1280

13:40:10 ScreenHeight=1024

13:40:10 WindowsVersion=5.1.2600

13:40:10 WindowsUser=Ian Day

13:40:10 SailwaveVersion=2.02 build 5

13:40:10 InstalledOn=08/10/10 16:25:15

13:40:10 InstalledBy=Ian Day

        13:40:10  ProgramFolder=C:\Files from

Viao\Sailwave

        13:40:10  StartInFolder=C:\Users\Ian

Day\Documents

        13:40:10  TempFileFolder=C:\Users\Ian

Day\AppData\Local\Temp

13:40:10 MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

13:40:10 Loaded 9 publishing templates

        13:40:10  Loading ratings from C:\A Working
Folder\Personal\HCSC\Saturday Series 2011\Sail

wave Files\

13:40:10 Loaded 103 ratings

13:40:20 Loaded 9 publishing templates

        I attach both the .blw file and the Ratings
file. One thing which puzzles me about the log file is that
it says it has loaded 103 ratings, but there are rather more
than that in the file!

        When I set up a new competitor, I use the
drop-down list of classes in the Competitor window, but to
get the Handicap field populated, I have to click on the
wavy blue line. The window to the Handicap file opens with
the right class selected, and when I click on OK, the
handicap field in the competitor window is populated – so I
think my problem is the same as Jim’s.

        I would be interested if you can suggest a way of
getting back to having the handicap field filled in
automatically – I’m sure I had that when I first started
using Sailwave!

Regards,

Ian Day

From:
            [] Colin
Jenkins
18 May 2011 11:37
Re: [sailwave] Re: Rating files

              jim, can
you attach your sailwave file. i agree you
should have to connect each rating by hand - the auto
facility will do it for you (or should) as long as the
class names match up of course…

Regards,

Colin J

[www.sailwave.com](http://www.sailwave.com)

            On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [http://www.sailing.org/](http://www.sailing.org/) -!- [http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Individual Email | Traditional

<*> To change settings online go to:

[http://groups.yahoo.com/group/sailwave/join](http://groups.yahoo.com/group/sailwave/join)

(Yahoo! ID required)

<*> To change settings via email:

sailwave-digest@yahoogroups.com

sailwave-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:

sailwave-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

[http://docs.yahoo.com/info/terms/](http://docs.yahoo.com/info/terms/)

-----

No virus found in this message.

Checked by AVG - [www.avg.com](http://www.avg.com)

Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11

        No virus found
in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3644 - Release
Date: 05/17/11

sailwave@yahoogroups.commailto:sailwave@yahoogroups.comOn Behalf Of
Sent:
**To:**sailwave@yahoogroups.com
Subject:

ColinJenkins · 18 May 2011 16:05

Ian, Jim at al,

  uploaded another version 2.03 build 4 that is better.

  this is how the class drop down now works:-

  class already used in file, value

class already used in file, value

class already used in file, value

  etc ...

  spacer line

class from rating file, value

class from rating file, value

class from rating file, value

  etc ...

  that way the classes already used in the series are there for easy

access at the top of the list and those that have not been used
can be selected by just scrolling down.

  i've remove the wavy line selector all together.

···

Regards,
Colin J

www.sailwave.com

eek!
    Sorry Ian and Jim et al.  It was a bug.  Fixed now in 2.03 build
3 on website.
    When you type in a class and click/tab away or select a class
from the drop-down, the rating field auto updates ok now. it
uses existing competitors first (in case you’ve tweaked the
value in the rating files) and if not found uses the rating
files.
    you can also use the selector (wavey lines) to select classes
that don’t exist in the series yet and it uses the value from
the item you selected.
    can't explain the "105" yet - i'll look later.



    batter me round the head a bit more next time...  must have been
there a long time.
  On 18/05/2011 13:54, Ian Day wrote:

Regards,
Colin J

www.sailwave.com

Colin,

          I have been experiencing the
same problem for a while – Until I saw someone else
discussing how to find a solution, I had thought it was
just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

13:40:10 CmdLineOpenProforma=0

13:40:10 CmdLineOpenNew=0

13:40:10 CmdLineShear=0

13:40:10 CmdRunFromRoot=0

13:40:10 ScreenWidth=1280

13:40:10 ScreenHeight=1024

          13:40:10 
WindowsVersion=5.1.2600

13:40:10 WindowsUser=Ian Day

          13:40:10  SailwaveVersion=2.02

build 5

          13:40:10  InstalledOn=08/10/10

16:25:15

13:40:10 InstalledBy=Ian Day

          13:40:10  ProgramFolder=C:\Files

from Viao\Sailwave

          13:40:10 
StartInFolder=C:\Users\Ian Day\Documents

          13:40:10 
TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

          13:40:10 
MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

          13:40:10  Loaded 9 publishing

templates

          13:40:10  Loading ratings from
C:\A Working Folder\Personal\HCSC\Saturday Series
2011\Sail

wave Files\

13:40:10 Loaded 103 ratings

          13:40:20  Loaded 9 publishing

templates

          I attach both the .blw file and
the Ratings file. One thing which puzzles me about the
log file is that it says it has loaded 103 ratings, but
there are rather more than that in the file!

          When I set up a new competitor,
I use the drop-down list of classes in the Competitor
window, but to get the Handicap field populated, I have to
click on the wavy blue line. The window to the Handicap
file opens with the right class selected, and when I click
on OK, the handicap field in the competitor window is
populated – so I think my problem is the same as Jim’s.

          I would be interested if you can
suggest a way of getting back to having the handicap field
filled in automatically – I’m sure I had that when I first
started using Sailwave!

Regards,

Ian Day

From:
[]
Colin Jenkins
18 May 2011 11:37
Re: [sailwave] Re: Rating files

                jim,
can you attach your sailwave file. i agree
you should have to connect each rating by hand - the
auto facility will do it for you (or should) as long
as the class names match up of course…

Regards,

Colin J

[www.sailwave.com](http://www.sailwave.com)

              On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [http://www.sailing.org/](http://www.sailing.org/) -!- [http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Individual Email | Traditional

<*> To change settings online go to:

[http://groups.yahoo.com/group/sailwave/join](http://groups.yahoo.com/group/sailwave/join)

(Yahoo! ID required)

<*> To change settings via email:

sailwave-digest@yahoogroups.com

sailwave-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:

sailwave-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

[http://docs.yahoo.com/info/terms/](http://docs.yahoo.com/info/terms/)

-----

No virus found in this message.

Checked by AVG - [www.avg.com](http://www.avg.com)

Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11

          No virus
found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3644 - Release
Date: 05/17/11

sailwave@yahoogroups.commailto:sailwave@yahoogroups.comOn Behalf Of
Sent:
**To:**sailwave@yahoogroups.com
Subject:

    No virus found in

this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date:
05/17/11

BassSC · 18 May 2011 20:03

Colin

I’ve downloaded 2.03b4 but it appears as build 3. Not sure whether it is in fact build 4

Regarding the amendments to entering boat class, the list of existing ratings shows all boats entered, not just unique classes. Eg there are 5 mirrors in the file being tested and mirror appears 5 times.

Regards

William Carruthers

(_(__(_

/)/)/)

···

Regards,
Colin J

www.sailwave.com

eek!
    Sorry Ian and Jim et al.  It was a bug.  Fixed now in 2.03 build
3 on website.
    When you type in a class and click/tab away or select a class
from the drop-down, the rating field auto updates ok now. it
uses existing competitors first (in case you’ve tweaked the
value in the rating files) and if not found uses the rating
files.
    you can also use the selector (wavey lines) to select classes
that don’t exist in the series yet and it uses the value from
the item you selected.
    can't explain the "105" yet - i'll look later.



    batter me round the head a bit more next time...  must have been
there a long time.
  On 18/05/2011 13:54, Ian Day wrote:

Regards,
Colin J

www.sailwave.com

Colin,

          I have been experiencing the
same problem for a while – Until I saw someone else
discussing how to find a solution, I had thought it was
just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

13:40:10 CmdLineOpenProforma=0

13:40:10 CmdLineOpenNew=0

13:40:10 CmdLineShear=0

13:40:10 CmdRunFromRoot=0

13:40:10 ScreenWidth=1280

13:40:10 ScreenHeight=1024

          13:40:10 
WindowsVersion=5.1.2600

13:40:10 WindowsUser=Ian Day

          13:40:10  SailwaveVersion=2.02

build 5

          13:40:10  InstalledOn=08/10/10

16:25:15

13:40:10 InstalledBy=Ian Day

          13:40:10  ProgramFolder=C:\Files

from Viao\Sailwave

          13:40:10 
StartInFolder=C:\Users\Ian Day\Documents

          13:40:10 
TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

          13:40:10 
MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

          13:40:10  Loaded 9 publishing

templates

          13:40:10  Loading ratings from
C:\A Working Folder\Personal\HCSC\Saturday Series
2011\Sail

      wave Files\

13:40:10 Loaded 103 ratings

          13:40:20  Loaded 9 publishing

templates

          I attach both the .blw file and
the Ratings file. One thing which puzzles me about the
log file is that it says it has loaded 103 ratings, but
there are rather more than that in the file!

          When I set up a new competitor,
I use the drop-down list of classes in the Competitor
window, but to get the Handicap field populated, I have to
click on the wavy blue line. The window to the Handicap
file opens with the right class selected, and when I click
on OK, the handicap field in the competitor window is
populated – so I think my problem is the same as Jim’s.

          I would be interested if you can
suggest a way of getting back to having the handicap field
filled in automatically – I’m sure I had that when I first
started using Sailwave!

Regards,

Ian Day

From:
[]
Colin Jenkins
18 May 2011 11:37
Re: [sailwave] Re: Rating files

                jim,
can you attach your sailwave file. i agree
you should have to connect each rating by hand - the
auto facility will do it for you (or should) as long
as the class names match up of course…

Regards,

Colin J

[](http://www.sailwave.com)[www.sailwave.com](http://www.sailwave.com)

              On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [](http://www.yachtsandyachting.com/)[http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [](http://www.sailing.org/)[http://www.sailing.org/](http://www.sailing.org/) -!- [](http://www.sailwave.com/)[http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf)[http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[](http://groups.yahoo.com/group/sailwave/)[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Indi

sailwave@yahoogroups.commailto:sailwave@yahoogroups.comOn Behalf Of
Sent:
**To:**sailwave@yahoogroups.com
Subject:

MalcolmO · 18 May 2011 21:24

I downloaded the install file sw203b4.exe from the SW website,but when it runs, it shows as 203b3 (under registry/version)

And the rating change is not evident.

regards,
Malcolm Osborne
Sedgefield, South Africa

···

----- Original Message -----

From:
Colin Jenkins

To: sailwave@yahoogroups.com

Sent: Wednesday, May 18, 2011 6:05 PM

Subject: Re: [sailwave] Re: Rating files

Ian, Jim at al,

uploaded another version 2.03 build 4 that is better.

this is how the class drop down now works:-

class already used in file, value
class already used in file, value
class already used in file, value
etc …
spacer line
class from rating file, value
class from rating file, value
class from rating file, value
etc …

that way the classes already used in the series are there for easy access at the top of the list and those that have not been used can be selected by just scrolling down.

i’ve remove the wavy line selector all together.

Regards,
Colin J
[www.sailwave.com](http://www.sailwave.com)

On 18/05/2011 14:57, Colin Jenkins wrote:

eek!

Sorry Ian and Jim et al.  It was a bug.  Fixed now in 2.03 build 3 on website.

When you type in a class and click/tab away or select a class from the drop-down, the rating field auto updates ok now.  it uses existing competitors first (in case you've tweaked the value in the rating files) and if not found uses the rating files.

you can also use the selector (wavey lines) to select classes that don't exist in the series yet and it uses the value from the item you selected.

can't explain the "105" yet - i'll look later.

batter me round the head a bit more next time...  must have been there a long time.

Regards,
Colin J
[www.sailwave.com](http://www.sailwave.com)

On 18/05/2011 13:54, Ian Day wrote:

Colin,

  I have been experiencing the same problem for a while  Until I saw someone else discussing how to find a solution, I had thought it was just an inconvenience to live with!

  Here is the log file:-

  13:40:10  CmdLineFile=

  13:40:10  CmdLineOpenProforma=0

  13:40:10  CmdLineOpenNew=0

  13:40:10  CmdLineShear=0

  13:40:10  CmdRunFromRoot=0

  13:40:10  ScreenWidth=1280

  13:40:10  ScreenHeight=1024

  13:40:10  WindowsVersion=5.1.2600

  13:40:10  WindowsUser=Ian Day

  13:40:10  SailwaveVersion=2.02 build 5

  13:40:10  InstalledOn=08/10/10 16:25:15

  13:40:10  InstalledBy=Ian Day

  13:40:10  ProgramFolder=C:\Files from Viao\Sailwave

  13:40:10  StartInFolder=C:\Users\Ian Day\Documents

  13:40:10  TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

  13:40:10  MyDocsFolder=C:\Users\Ian Day\Documents

  13:40:10  CommandLine=

  13:40:10  Loaded 9 publishing templates

  13:40:10  Loading ratings from C:\A Working Folder\Personal\HCSC\Saturday Series 2011\Sail

            wave Files\

  13:40:10  Loaded 103 ratings

  13:40:20  Loaded 9 publishing templates

  I attach both the .blw file and the Ratings file.  One thing which puzzles me about the log file is that it says it has loaded 103 ratings, but there are rather more than that in the file!

  When I set up a new competitor, I use the drop-down list of classes in the Competitor window, but to get the Handicap field populated, I have to click on the wavy blue line.  The window to the Handicap file opens with the right class selected, and when I click on OK, the handicap field in the competitor window is populated  so I think my problem is the same as Jims.

  I would be interested if you can suggest a way of getting back to having the handicap field filled in automatically  Im sure I had that when I first started using Sailwave!

Regards,

** Ian Day**

From: sailwave@yahoogroups.com [mailto:sailwave@yahoogroups.com] On Behalf Of Colin Jenkins
Sent: 18 May 2011 11:37
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] Re: Rating files

jim, can you attach your sailwave file. i agree you should have to connect each rating by hand - the auto facility will do it for you (or should) as long as the class names match up of course…

Regards,
Colin J
[www.sailwave.com](http://www.sailwave.com)
On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [http://www.sailing.org/](http://www.sailing.org/) -!- [http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Individual Email | Traditional

<*> To change settings online go to:

[http://groups.yahoo.com/group/sailwave/join](http://groups.yahoo.com/group/sailwave/join)

(Yahoo! ID required)

<*> To change settings via email:

sailwave-digest@yahoogroups.com

sailwave-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:

sailwave-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

[http://docs.yahoo.com/info/terms/](http://docs.yahoo.com/info/terms/)

-----

No virus found in this message.

Checked by AVG - [www.avg.com](http://www.avg.com)

Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11

  No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11

ColinJenkins · 18 May 2011 21:54

Fixed. See build 5 on website.

···

Regards,
Colin J

www.sailwave.com

      I downloaded the install file
sw203b4.exe from the SW website,but when it runs, it shows as
203b3 (under registry/version)

      And the rating change is not

evident.

regards,

      Malcolm Osborne

      Sedgefield, South Africa

----- Original Message -----

From: Colin Jenkins

To: sailwave@yahoogroups.com

Sent: Wednesday, May 18,
2011 6:05 PM

Subject: Re: [sailwave]
Re: Rating files

Ian, Jim at al,

          uploaded another version 2..03 build 4 that is better.



          this is how the class drop down now works:-



          class already used in file, value

                      class already used in file,

value

                      class already used in file,

value

          etc ...

          spacer line

        class from rating file, value

        class from rating file, value

        class from rating file, value

          etc ...



          that way the classes already used in the series are there

for easy access at the top of the list and those that have
not been used can be selected by just scrolling down.

          i've remove the wavy line selector all together.

On 18/05/2011 14:57, Colin Jenkins wrote:

      No virus found
in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3645 - Release Date:
05/18/11

Regards,
Colin J

www.sailwave.com

eek!
          Sorry Ian and Jim et al.  It was a bug.  Fixed now in 2.03
build 3 on website.
          When you type in a class and click/tab away or select a
class from the drop-down, the rating field auto updates ok
now. it uses existing competitors first (in case you’ve
tweaked the value in the rating files) and if not found
uses the rating files.
          you can also use the selector (wavey lines) to select
classes that don’t exist in the series yet and it uses the
value from the item you selected.
          can't explain the "105" yet - i'll look later.



          batter me round the head a bit more next time...  must
have been there a long time.
        On 18/05/2011 13:54, Ian Day wrote:

Regards,
Colin J

www.sailwave.com

Colin,

                I have been experiencing the
same problem for a while – Until I saw someone else
discussing how to find a solution, I had thought it
was just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

                13:40:10

CmdLineOpenProforma=0

13:40:10 CmdLineOpenNew=0

13:40:10 CmdLineShear=0

13:40:10 CmdRunFromRoot=0

13:40:10 ScreenWidth=1280

13:40:10 ScreenHeight=1024

                13:40:10

WindowsVersion=5.1.2600

                13:40:10  WindowsUser=Ian

Day

                13:40:10

SailwaveVersion=2.02 build 5

                13:40:10

InstalledOn=08/10/10 16:25:15

                13:40:10  InstalledBy=Ian

Day

                13:40:10 
ProgramFolder=C:\Files from Viao\Sailwave

                13:40:10 
StartInFolder=C:\Users\Ian Day\Documents

                13:40:10 
TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

                13:40:10 
MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

                13:40:10  Loaded 9

publishing templates

                13:40:10  Loading ratings
from C:\A Working Folder\Personal\HCSC\Saturday
Series 2011\Sail

      wave Files\

13:40:10 Loaded 103 ratings

                13:40:20  Loaded 9

publishing templates

                I attach both the .blw file
and the Ratings file. One thing which puzzles me
about the log file is that it says it has loaded 103
ratings, but there are rather more than that in the
file!

                When I set up a new
competitor, I use the drop-down list of classes in
the Competitor window, but to get the Handicap field
populated, I have to click on the wavy blue line.
The window to the Handicap file opens with the
right class selected, and when I click on OK, the
handicap field in the competitor window is populated
– so I think my problem is the same as Jim’s.

                I would be interested if you
can suggest a way of getting back to having the
handicap field filled in automatically – I’m sure I
had that when I first started using Sailwave!

Regards,

Ian Day

From: []
Colin Jenkins
18 May 2011 11:37
Re: [sailwave] Re: Rating files

jim, can you attach your sailwave file.
i agree you should have to connect each rating
by hand - the auto facility will do it for you
(or should) as long as the class names match up
of course…

Regards,

Colin J

[www.sailwave.com](http://www.sailwave.com)

                    On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [http://www.sailing.org/](http://www.sailing.org/) -!- [http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo
! Groups Links

<*> To visit your group on the web, go to:

[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Individual Email | Traditional

<*> To change settings online go to:

[http://groups.yahoo.com/group/sailwave/join](http://groups.yahoo.com/group/sailwave/join)

(Yahoo! ID required)

<*> To change settings via email:

sailwave-digest@yahoogroups.com

sailwave-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:

sailwave-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

[http://docs.yahoo.com/info/terms/](http://docs.yahoo.com/info/terms/)

-----

No virus found in this message.

Checked by AVG - [www.avg.com](http://www.avg.com)

Version: 10.0.1325 / Virus Database: 1509/3644 - Release Date: 05/17/11

                No
virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3644 -
Release Date: 05/17/11

sailwave@yahoogroups.commailto:sailwave@yahoogroups.comOn Behalf Of
Sent:
**To:**sailwave@yahoogroups.com
Subject:

          No virus

found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3644 - Release
Date: 05/17/11

ColinJenkins · 18 May 2011 21:57

Bugger - true. Fixed in build 5. uploaded.
thanks for feedback.

···

Regards,
Colin J

www.sailwave.com

Colin

    I've downloaded 2.03b4 but it appears as build 3. Not sure

whether it is in fact build 4

    Regarding the amendments to entering boat class, the list of
existing ratings shows all boats entered, not just unique
classes. Eg there are 5 mirrors in the file being tested and
mirror appears 5 times.

Regards
    William Carruthers
Sent from my iPhone

(_(__(_

/)/)/)

    On 18 May 2011, at 17:05, Colin Jenkins <colin@sailwave.com        >

wrote:

Ian, Jim at al,

            uploaded another version 2.03 build 4 that is better.



            this is how the class drop down now works:-



            class already used in file, value

                          class already used in file,

value

                          class already used in file,

value

            etc ...

            spacer line

          class from rating file, value

          class from rating file, value

          class from rating file, value

            etc ...



            that way the classes already used in the series are

there for easy access at the top of the list and those
that have not been used can be selected by just
scrolling down.

            i've remove the wavy line selector all together.

On 18/05/2011 14:57, Colin Jenkins wrote:

    No virus found in
this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3645 - Release Date:
05/18/11

Regards,
Colin J
[www.sailwave.com](http://www.sailwave.com)

eek!
            Sorry Ian and Jim et al.  It was a bug.  Fixed now in
2.03 build 3 on website.
            When you type in a class and click/tab away or select a
class from the drop-down, the rating field auto updates
ok now. it uses existing competitors first (in case
you’ve tweaked the value in the rating files) and if not
found uses the rating files.
            you can also use the selector (wavey lines) to select
classes that don’t exist in the series yet and it uses
the value from the item you selected.
            can't explain the "105" yet - i'll look later.



            batter me round the head a bit more next time...  must
have been there a long time.
          On 18/05/2011 13:54, Ian Day wrote:

Regards,
Colin J
[www.sailwave.com](http://www.sailwave.com)

Colin,

                  I have been experiencing
the same problem for a while – Until I saw someone
else discussing how to find a solution, I had
thought it was just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

                  13:40:10

CmdLineOpenProforma=0

                  13:40:10

CmdLineOpenNew=0

13:40:10 CmdLineShear=0

                  13:40:10

CmdRunFromRoot=0

                  13:40:10

ScreenWidth=1280

                  13:40:10

ScreenHeight=1024

                  13:40:10

WindowsVersion=5.1.2600

                  13:40:10

WindowsUser=Ian Day

                  13:40:10

SailwaveVersion=2.02 build 5

                  13:40:10

InstalledOn=08/10/10 16:25:15

                  13:40:10

InstalledBy=Ian Day

                  13:40:10 
ProgramFolder=C:\Files from Viao\Sailwave

                  13:40:10 
StartInFolder=C:\Users\Ian Day\Documents

                  13:40:10 
TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

                  13:40:10 
MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

                  13:40:10  Loaded 9

publishing templates

                  13:40:10  Loading
ratings from C:\A Working
Folder\Personal\HCSC\Saturday Series 2011\Sail

      wave Files\

                  13:40:10  Loaded 103

ratings

                  13:40:20  Loaded 9

publishing templates

                  I attach both the .blw
file and the Ratings file. One thing which
puzzles me about the log file is that it says it
has loaded 103 ratings, but there are rather more
than that in the file!

                  When I set up a new
competitor, I use the drop-down list of classes in
the Competitor window, but to get the Handicap
field populated, I have to click on the wavy blue
line. The window to the Handicap file opens with
the right class selected, and when I click on OK,
the handicap field in the competitor window is
populated – so I think my problem is the same as
Jim’s.

                  I would be interested if
you can suggest a way of getting back to having
the handicap field filled in automatically – I’m
sure I had that when I first started using
Sailwave!

Regards,

Ian Day

From: sailwave@yahoogroups.com
[mailto:sailwave@yahoogroups.com ]
On Behalf Of Colin Jenkins
Sent: 18 May 2011 11:37
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] Re: Rating
files

jim, can you attach your sailwave file.
i agree you should have to connect each rating
by hand - the auto facility will do it for you
(or should) as long as the class names match
up of course…

Regards,

Colin J

[www.sailwave.com](http://www.sailwave.com)

                      On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail.. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [http://www.sailing.org/](http://www.sailing.org/) -!- [http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Indi

BassSC · 18 May 2011 22:00

Thanks Colin. As you said - fixed!

William Carruthers

(_(__(_

/)/)/)

···

Regards,
Colin J

www.sailwave.com

Colin

    I've downloaded 2.03b4 but it appears as build 3. Not sure

whether it is in fact build 4

    Regarding the amendments to entering boat class, the list of
existing ratings shows all boats entered, not just unique
classes. Eg there are 5 mirrors in the file being tested and
mirror appears 5 times.

Regards
    William Carruthers
Sent from my iPhone

(_(__(_

/)/)/)

    On 18 May 2011, at 17:05, Colin Jenkins <colin@sailwave.com        >

wrote:

Ian, Jim at al,

            uploaded another version 2.03 build 4 that is better.



            this is how the class drop down now works:-



            class already used in file, value

                          class already used in file,

value

                          class already used in file,

value

            etc ...

            spacer line

          class from rating file, value

          class from rating file, value

          class from rating file, value

            etc ...



            that way the classes already used in the series are

there for easy access at the top of the list and those
that have not been used can be selected by just
scrolling down.

            i've remove the wavy line selector all together.

On 18/05/2011 14:57, Colin Jenkins wrote:

    No virus found in
this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1509/3645 - Release Date:
05/18/11

Regards,
Colin J
[](http://www.sailwave.com)[www.sailwave.com](http://www.sailwave.com)

eek!
            Sorry Ian and Jim et al.  It was a bug.  Fixed now in
2.03 build 3 on website.
            When you type in a class and click/tab away or select a
class from the drop-down, the rating field auto updates
ok now. it uses existing competitors first (in case
you’ve tweaked the value in the rating files) and if not
found uses the rating files.
            you can also use the selector (wavey lines) to select
classes that don’t exist in the series yet and it uses
the value from the item you selected.
            can't explain the "105" yet - i'll look later.



            batter me round the head a bit more next time...  must
have been there a long time.
          On 18/05/2011 13:54, Ian Day wrote:

Regards,
Colin J
[](http://www.sailwave.com)[www.sailwave.com](http://www.sailwave.com)

Colin,

                  I have been experiencing
the same problem for a while – Until I saw someone
else discussing how to find a solution, I had
thought it was just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

                  13:40:10

CmdLineOpenProforma=0

                  13:40:10

CmdLineOpenNew=0

13:40:10 CmdLineShear=0

                  13:40:10

CmdRunFromRoot=0

                  13:40:10

ScreenWidth=1280

                  13:40:10

ScreenHeight=1024

                  13:40:10

WindowsVersion=5.1.2600

                  13:40:10

WindowsUser=Ian Day

                  13:40:10

SailwaveVersion=2.02 build 5

                  13:40:10

InstalledOn=08/10/10 16:25:15

                  13:40:10

InstalledBy=Ian Day

                  13:40:10 
ProgramFolder=C:\Files from Viao\Sailwave

                  13:40:10 
StartInFolder=C:\Users\Ian Day\Documents

                  13:40:10 
TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

                  13:40:10 
MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

                  13:40:10  Loaded 9

publishing templates

                  13:40:10  Loading
ratings from C:\A Working
Folder\Personal\HCSC\Saturday Series 2011\Sail

      wave Files\

                  13:40:10  Loaded 103

ratings

                  13:40:20  Loaded 9

publishing templates

                  I attach both the .blw
file and the Ratings file. One thing which
puzzles me about the log file is that it says it
has loaded 103 ratings, but there are rather more
than that in the file!

                  When I set up a new
competitor, I use the drop-down list of classes in
the Competitor window, but to get the Handicap
field populated, I have to click on the wavy blue
line. The window to the Handicap file opens with
the right class selected, and when I click on OK,
the handicap field in the competitor window is
populated – so I think my problem is the same as
Jim’s.

                  I would be interested if
you can suggest a way of getting back to having
the handicap field filled in automatically – I’m
sure I had that when I first started using
Sailwave!

Regards,

Ian Day

From: sailwave@yahoogroups.com
[mailto:sailwave@yahoogroups.com ]
On Behalf Of Colin Jenkins
Sent: 18 May 2011 11:37
To: sailwave@yahoogroups.com
Subject: Re: [sailwave] Re: Rating
files

jim, can you attach your sailwave file.
i agree you should have to connect each rating
by hand - the auto facility will do it for you
(or should) as long as the class names match
up of course…

Regards,

Colin J

[](http://www.sailwave.com)[www.sailwave.com](http://www.sailwave.com)

                      On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail.. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [](http://www.yachtsandyachting.com/)[http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [](http://www.sailing.org/)[http://www.sailing.org/](http://www.sailing.org/) -!- [](http://www.sailwave.com/)[http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf)[http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[](http://groups.yahoo.com/group/sailwave/)[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Indi

BassSC · 18 May 2011 22:07

Wavy line still there …

The search for ratings seems limited to the existing boats not the whole list of ratings. Relevant as search for scorpion involves scrolling down to find class. Using wavy line would have jumped to ‘S’ readily

Oh dear, more tweaks for next build

William Carruthers

(_(__(_

/)/)/)

···

Regards,
Colin J

www.sailwave.com

eek!
    Sorry Ian and Jim et al.  It was a bug.  Fixed now in 2.03 build
3 on website.
    When you type in a class and click/tab away or select a class
from the drop-down, the rating field auto updates ok now. it
uses existing competitors first (in case you’ve tweaked the
value in the rating files) and if not found uses the rating
files.
    you can also use the selector (wavey lines) to select classes
that don’t exist in the series yet and it uses the value from
the item you selected.
    can't explain the "105" yet - i'll look later.



    batter me round the head a bit more next time...  must have been
there a long time.
  On 18/05/2011 13:54, Ian Day wrote:

Regards,
Colin J

www.sailwave.com

Colin,

          I have been experiencing the
same problem for a while – Until I saw someone else
discussing how to find a solution, I had thought it was
just an inconvenience to live with!

Here is the log file:-

13:40:10 CmdLineFile=

13:40:10 CmdLineOpenProforma=0

13:40:10 CmdLineOpenNew=0

13:40:10 CmdLineShear=0

13:40:10 CmdRunFromRoot=0

13:40:10 ScreenWidth=1280

13:40:10 ScreenHeight=1024

          13:40:10 
WindowsVersion=5.1.2600

13:40:10 WindowsUser=Ian Day

          13:40:10  SailwaveVersion=2.02

build 5

          13:40:10  InstalledOn=08/10/10

16:25:15

13:40:10 InstalledBy=Ian Day

          13:40:10  ProgramFolder=C:\Files

from Viao\Sailwave

          13:40:10 
StartInFolder=C:\Users\Ian Day\Documents

          13:40:10 
TempFileFolder=C:\Users\Ian Day\AppData\Local\Temp

          13:40:10 
MyDocsFolder=C:\Users\Ian Day\Documents

13:40:10 CommandLine=

          13:40:10  Loaded 9 publishing

templates

          13:40:10  Loading ratings from
C:\A Working Folder\Personal\HCSC\Saturday Series
2011\Sail

      wave Files\

13:40:10 Loaded 103 ratings

          13:40:20  Loaded 9 publishing

templates

          I attach both the .blw file and
the Ratings file. One thing which puzzles me about the
log file is that it says it has loaded 103 ratings, but
there are rather more than that in the file!

          When I set up a new competitor,
I use the drop-down list of classes in the Competitor
window, but to get the Handicap field populated, I have to
click on the wavy blue line. The window to the Handicap
file opens with the right class selected, and when I click
on OK, the handicap field in the competitor window is
populated – so I think my problem is the same as Jim’s.

          I would be interested if you can
suggest a way of getting back to having the handicap field
filled in automatically – I’m sure I had that when I first
started using Sailwave!

Regards,

Ian Day

From:
[]
Colin Jenkins
18 May 2011 11:37
Re: [sailwave] Re: Rating files

                jim,
can you attach your sailwave file. i agree
you should have to connect each rating by hand - the
auto facility will do it for you (or should) as long
as the class names match up of course…

Regards,

Colin J

[](http://www.sailwave.com)[www.sailwave.com](http://www.sailwave.com)

              On 17/05/2011 22:38, Jim wrote:

Colin

Ian Frogley has been trying to help me but to no avail. I have now downloaded version 2.03 build 2. I have deselected the connect to internet option. I have selected the auto set competitor ratings and RYA Portsmouth in Scoring System. I have put a ratings file into a new folder and linked to it from Global options. On opening a competitors details the ratings file has clearly been accessed as all the PY ratings are there. But they don't follow through to the competitors, to update the competitors' ratings I would  have to do each one manually by clicking on the blue wave icon. No different from when I started.

Log file below.

Thanks

Jim

22:31:05  CmdLineFile=C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test folder\ent

_spring1_2008.blw

22:31:05  CmdLineOpenProforma=0

22:31:05  CmdLineOpenNew=0

22:31:05  CmdLineShear=0

22:31:05  CmdRunFromRoot=0

22:31:05  SailwaveVersion=2.03 build 2

22:31:05  ScreenWidth=1366

22:31:05  ScreenHeight=768

22:31:05  WindowsVersion=6.0.6002

22:31:05  WindowsUser=Strothers

22:31:05  InstalledOn=05/17/11 19:03:49

22:31:05  InstalledBy=Strothers

22:31:05  ProgramFolder=C:\Program Files\Sailwave

22:31:05  StartInFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  TempFileFolder=C:\Users\Strothers\AppData\Local\Temp

22:31:05  MyDocsFolder=C:\Users\Strothers\Desktop\Documents

22:31:05  DataFolder=C:\ProgramData\Sailwave

22:31:05  CommandLine= open="C:\Users\Strothers\Desktop\Documents\Sailing\Results\Test fol

der\ent_spring1_2008.blw"

22:31:05  Loaded 9 publishing templates

22:31:06  Loading ratings from C:\Users\Strothers\Desktop\Documents\Sailing\Results\Sailwa

ve ratings\

22:31:06  Loaded 81 ratings

22:31:07  Loaded 9 publishing templates

------------------------------------

-!- [](http://www.yachtsandyachting.com/)[http://www.yachtsandyachting.com/](http://www.yachtsandyachting.com/) -!- [](http://www.sailing.org/)[http://www.sailing.org/](http://www.sailing.org/) -!- [](http://www.sailwave.com/)[http://www.sailwave.com/](http://www.sailwave.com/) -!- On-Line Sailwave help...http://sailwave.com/help/HTML ~ Mark Townsend's Sailwave User Guide is available from [](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf)[http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf](http://www.abyc.org/upload/Sailwave_ABYC_User_Guide.pdf) ~ Convert to daily digest of emails send blank email to sailwave-digest@yahoogroups.com ~ To unsubscribe from the SUG please send blank email to sailwave-unsubscribe@yahoogroups.com Yahoo! Groups Links

<*> To visit your group on the web, go to:

[](http://groups.yahoo.com/group/sailwave/)[http://groups.yahoo.com/group/sailwave/](http://groups.yahoo.com/group/sailwave/)

<*> Your email settings:

Indi

sailwave@yahoogroups.commailto:sailwave@yahoogroups.comOn Behalf Of
Sent:
**To:**sailwave@yahoogroups.com
Subject: